The VF Team is very excited to release the VF-RS front wide fender for the FRS/BRZ/GT-86. This design is the first full fender replacement for this platform showcasing a uniform width increase of +20mm across the full sweep of the wheel. ( from parking light to over tire ) instead of just the apex at the top of the fender arch. This alleviates exaggerated camber solutions when utilizing the new extruded width and keeps the rotational arc of tire away from the corner light. These fenders are a direct bolt-on replacement and also have a optional engine air pass-through to help with temps. The VF Team goal is to offer a solution for a square setup on the car.
- Made in Carbon Fiber 2x2 Twill Weave
- Plus +20 mm wider than OEM
- Retains Original factory fender liner
- Direct Bolt-on replacement for factory fenders
- Subaru BRZ 2013-2016
- 3 to 4 week prep time
Policies-Terms and Conditions:
Victory Function LLC follows a lean manufacturing process-- all our products are made to order unless specifically stated. We do not allow cancellations after you have placed your order. WE DO NOT OFFER REFUNDS OR GUARANTEES OF ANY TYPE.
We make every effort to deliver your product in a timely manner, wait times may vary. All Victory Function products are inspected for structural integrity and finish prior to packaging. Please check all items upon arrival. If the shipping box has visible damage, make note on the receipt while the delivery personnel is there with you and take pictures of the damage; failure to do so may result in the loss of claim. Report any shipping damages within 24 hours to Victory Function. Any discoveries of product damages after delivery and signature then becomes the responsibility of the customer. Professional installation is required for all parts. Victory Function does not accept any claims of damages caused by installation error, nor does Victory Function take responsibility for troubles or any accidents caused by installation. Test fit all parts prior to any alteration and/or painting. Victory Function does not accept any claims of damages or issues of installation after the product has been drilled and/or painted. If there are any visible damages, please contact the authorized reseller in which you purchased the product from. Exchanges are only allowed if there was a mistake made on the order or in the event of defective products. Alteration of the part will void any exchanges.
If your issue is due to improper fitment, pictures are required. The part must be placed on the vehicle and images taken with the vehicle. All Victory Function Fiber Reinforced Plastic (FRP) products are produced in a high quality white gel coat. Due to the manufacturing process of FRP, small imperfections such as, but not limited to, air bubbles, voids, resin pockets, may appear on the surface of the product. This is a normal characteristic of hand-laid FRP and not a manufacturing defect. Mounting tab thickness may vary slightly; Minor preparation may include, but is not limited to sanding, grinding, and cutting. This will not affect the product’s function. All Victory Function Carbon Fiber Reinforced Plastic (CFRP) products can be used without painting due to our additional ultraviolet-resistant clear coat application after the resin curing process. NOTE: in the event any discoloration appears, it will not affect the product’s function, please paint the product to match the vehicle. Due tothe manufacturing process of CFRP, small imperfections such as, but not limited to, air bubbles, voids, resin pockets, may appear on the surface of the product. This is a normal characteristic of hand-laid CFRP and not a manufacturing defect. Mounting tab thickness may vary slightly; Minor preparation may include, but is not limited to sanding, grinding, and cutting. This will not affect the product’s function.
All our prices are subject to change without notice. Victory Function does not sell nor share your personal information